Warnings! (please read carefully)



Download 93.25 Kb.
View original pdf
Page2/14
Date07.11.2018
Size93.25 Kb.
1   2   3   4   5   6   7   8   9   ...   14
1. Description
The MiniMain12 is a four-way active loudspeaker capable of nearfield, midfield and far-field operation. The seven drive units are all housed in sealed enclosures. The DSP controlled four-way power amplifier module can deliver 1200 Watts continuously. The system accepts either analog orbit kHz digital audio signals. Cutting edge Speaker Emulation technology enable the MiniMain12 to mimic frequency, phase, and transient responses, dynamic compression and distortion signature of classic studio monitors.
3
2. Startup
1. Verify that AC Voltage select switch on the rear panel is in the correct position for the AC voltage in your facility (see warnings on pervious page for details) then pug in grounded mains power cable.
2. Set Input toggle switch to either analog (A) or digital (D) depending on the type of source signal you are using. For digital signals also set the Channel toggle switch to left (L) or right (R) in accordance with the speaker position.
3. Ensure that the audio signal is fully attenuated (AES3 signal requires digital attenuation) then plugin the signal XLR cable to the appropriate input.
4. Power on the speaker with the rocker switch located on the rear panel above the mains connector. The LED indicator on the front of the speaker will illuminate Red fora couple of seconds then turn Aqua.
5. Turn up the audio signal and enjoy

1   2   3   4   5   6   7   8   9   ...   14


The database is protected by copyright ©userg.info 2017
send message

    Main page

bosch
camera
chevrolet
epson
fiat
Honda
iphone
mitsubishi
nissan
Panasonic
Sony
volvo
yamaha