GEAR SELECTED range H to M +/–) Indicates the current gear on MN, and P transmissions when viewed in Expert Mode data group 007, display field 1. The + or – sign relates to the lockup slip of the torque converter clutch. A plus sign (“+”) indicates that the engine speed (pump speed) is greater than the turbine speed, and so the vehicle is under traction. A minus sign (“–“) indicates that the engine speed is less than the turbine speed, and so the vehicle in overrun. On-Board Diagnostic (range 0 to 1) Indicates the on-board diagnostic display information from left to right. This display group can be viewed in Expert Mode display group 004, display field 4. The display indicates malfunction (1 = switched on 0 = switched off, trip (1 = complete 0 = not complete, transmission warm-up (1 = complete 0 = not complete, engine start (1 = recognized 0 = not recognized. Overrun/engine pulling signal _______________________ (range overrun/engine pulling) Indicates whether an V transmission is in overrun or normal mode when viewed from Expert Mode in display group 008, display field 4. If in overrun, the transaxle has engine braking. With no display normal driving, the engine is delivering power.