Vending System Manual Model Number: hy-800/850/870



Download 415.22 Kb.
View original pdf
Page1/68
Date14.05.2019
Size415.22 Kb.
  1   2   3   4   5   6   7   8   9   ...   68


Vending System Manual
Model Number HY-800/850/870
February Revision A


© 2011 HealthyYOU™ Vending
© 2011 HealthyYOU™ Vending - All rights reserved.
No part of this publication maybe reproduced, distributed, or transmitted in any form or by any means, or stored in a database or retrieval system, without the prior written permission of HealthyYOU™ Vending.
The information contained in this publication was correct to the best of the company’s knowledge when it was produced. In the interest of development, the right is reserved to change specifications, design or equipment at anytime without notice and without incurring any obligations.


TABLE OF CONTENTS
x Copyright x Machine Serial Numbers- 2


Part one introduction
Appendices -38
Serial # for hy-800: ________________
Part one – introduction
The healthyyou™ vending system includes:
Load the back area first
Note:the healthyyou™ entrée/side dish installation instructions are given to you as an addendum
Change backthe healthyyou™ vending system does not
Keep track of sales and profits
Drink section temperature readout
Part two – installation
Part three - electronic control unit (ecu)
Ecu power switch
How to navigate the hy800/850 vending system
Off: (default) bills accepted up to total $ value in the coin changer. on:
For bins bb, and b03:
Second1st ramp bottom 5 cans here first
Second,make sure this row has a can behind it.third,
Examples of some drinks that will vend in the hy-850
Notes and helpful suggestions
Note: factory preset prices are $ 0.75 on all snack bins, $0.85 on all drinks.
Part five – service and maintenance
Service and technical information
How to remove a snack motor:
Installing beverage motors:
Follow these steps to connect wire harness to hy-800/850:
You are now ready to begin testing, programming and loading
Section 1: general information
Option switch setting
Coin recognition
Section 3: operation
Credit and accumulation
Inventory switches
Correct change operation
Interface between the
Individual module
Main logic board assembly
Disassembling payout base
Section 4: maintenance
Section 6: troubleshooting
Anti-static precautions should be observed when cleaning validator head.
Gbaglobal bill acceptors
Validator inhibited by host:



Share with your friends:
  1   2   3   4   5   6   7   8   9   ...   68


The database is protected by copyright ©userg.info 2017
send message

    Main page

bosch
camera
chevrolet
epson
fiat
Harley Davidson
Honda
iphone
mitsubishi
nissan
Panasonic
Sony
volvo
xiaomi
Xperia
yamaha