4. Slip the coil spring onto the spring base on the back of the pedal, then close the pedal. * Carefully avoid getting the snap cord caught in the coil spring. 5. Finally, insert the thumbscrew into the guide bush hole and fasten it securely. Thumbscrew Pedal Spring Base Coil Spring Guide Bush Hole Battery Housing Battery Snap Cord Battery Snap 9V Battery
15 Troubleshooting Power won’t come on: q Is the specified adaptor (PSA-series; sold separately) properly connected? Check the connection once more (pi * Never use any AC adapter other than one specified for use with the BF-3. q Is the battery low or dead? Replace with anew battery (p. 14). q Is the guitar connected properly to the GUITAR IN or BASS IN jack? Check the connection once more (pi * To prevent excess battery drainage, turn the power on without the plug inserted in the GUITAR IN or BASS IN jack. * The battery that was supplied with the unit is for temporary use-intended primarily for testing its operation. For using the unit for more extended periods of time, we recommend the use of alkaline batteries. * The CHECK indicator shows whether the effect is being applied or not, and is used to indicate other effects. It does not indicate whether the power to the device is on or not.