User’s manual en


Fixing the controller to the wall



Download 54.55 Kb.
View original pdf
Page6/15
Date07.11.2018
Size54.55 Kb.
1   2   3   4   5   6   7   8   9   ...   15
Fixing the controller to the wall
Alternative fixing methods
To fix the AURATON 200 TRA controller to the wall:
1. Remove the enclosure (as described on the Battery installation/
replacement” section).
2. Drill 2 holes diameter 6 mm in the wall (use the back of the controller enclosure to set the right spacing of the holes).
3. Place plastic plugs in the drilled holes.
4. Screw the back of the controller enclosure to the wall with the two screws provided.
5. Install the batteries and replace the controller enclosure.
NOTE: No expansion bolts are needed for wooden walls. Just drill holes
diameter 2.7 mm (instead of 6 mm) and screw the screws directly into
the wood.
The controller can be mounted to a smooth surface with e.g. two-sided adhesive tape.
The controller can also be placed in any location on an even surface on a support at the back of the enclosure.
hole fora mounting screw hole fora mounting screw


User’s manual
Frostguard function
Starting the controller for the first time
Note: when pressing any function key for the first time, the backlight
Description of the auraton tra head
Communication between the head
Signaling after startup of the head
Installation tips



Share with your friends:
1   2   3   4   5   6   7   8   9   ...   15


The database is protected by copyright ©userg.info 2017
send message

    Main page

bosch
camera
chevrolet
epson
fiat
Honda
iphone
mitsubishi
nissan
Panasonic
Sony
volvo
yamaha