CAMERA STATUS SCREEN The camera status screen displays the following information about modes and settings. Camera Modes/FOV field of view. Spot Meter when Spot Meter is turned on. Resolution/fps frames per second. Time Lapse Interval Setting not shown. Counter. Time/Storage/Files 7. Battery Life Note: The icons that appear on the camera status screen vary by mode.
18 19 Camera Modes Video Photo Burst Time Lapse Settings Settings Resolution Spot Meter Upside Down QuikCapture NTSC/PAL LEDs Beeps Date/Time Delete Exit / Camera Icons Camera Menus
20 21 The HERO features several camera modes. To display the modes, press the Power/Mode button repeatedly. These modes appear: Video (default) Record video Photo Capture a single photo Burst Capture 10 photos in 2 seconds Time Lapse Capture a photo every 0.5 seconds Settings Adjust camera settings Camera Modes Video Mode CAPTURING VIDEO To capture video, verify that the camera is in Video mode. If the Video icon [ ] does not appear in the upper left on your camera status screen, press the Power/Mode button repeatedly until it appears. To Start Recording Press the Shutter/Select button. The camera emits one beep and the camera status lights flash while recording. To Stop Recording Press the Shutter/Select button. The camera status lights flash three times and the camera emits three beeps to indicate recording has stopped. If the memory card is full or the battery is out of power, your camera automatically stops recording. Your video is saved before the camera powers off. PRO TIP: With QuikCapture, you can quickly turn your camera on and immediately begin capturing video just by pressing the Shutter/ Select button. To turnoff QuikCapture, see QuikCapture page 29).