28 29 / Settings Mode SPOT METER Spot Meter is good for filming into a setting where the lighting is different from where you are, such as filming the outdoors from within a car or a shaded environment while standing in the sun. Spot Meter automatically sets the exposure based on a single spot in the middle of the image. When Spot Meter is turned on, [ ] appears on the camera status screen. The options for this setting are Off (default) and On. UPSIDE DOWN If you mount your camera upside down, you might have to rotate the files during editing. This setting eliminates the need to flip your video or photos after capture when the camera is mounted upside down. The default setting is Up. Setting Description Up Camera is used right-side up. Down Camera is used upside down Settings Mode QUIKCAPTURE With QuikCapture, you can quickly turn your camera on and begin capturing video or Time Lapse photos. The options for this setting are On (default) and Off. To Use QuikCapture to Capture Video With the camera powered off, press and release the Shutter/Select button. Your camera automatically powers on and begins capturing video. To Use QuikCapture to Capture Time Lapse Photos With the camera powered off, press and hold the Shutter/Select button for two seconds. Your camera automatically powers on and begins capturing Time Lapse photos. To Stop Recording Press and release the Shutter/Select button to stop recording and power off the camera.