User Guide M211095en-h



Download 8.38 Kb.
View original pdf
Page99/125
Date24.02.2019
Size8.38 Kb.
1   ...   95   96   97   98   99   100   101   102   ...   125
More Information
‣ Parameter Handling Commands (page ERRORS — Get Error Codes and Counts (page Chapter 7 – Troubleshooting
169


7.3 Restoring Serial Port Settings
If you are not familiar with the configured settings of WMT700, or if the settings have been accidentally changed, you may not get any response when you send the
OPEN command to
WMT700. In that case, restore the serial port settings to known values. Connect a cable between your terminal computer, power supply, and WMT700.
2. Open the Windows HyperTerminal program. You can also use other terminal programs, such as Tera Term. Cancel the new connection. Select File > Properties.
5. Select the correct COM port and then Configure.
6. Regardless of the configured port settings of WMT700, select the following communication settings Bits per second Data bits Parity None
• Stop bits Flow Control None. Close the New Connection Properties window. Connect to WMT700 using the RS interface. Switch the sensor power supply off and back on. Press
# on your keyboard and hold down the key for at least five seconds. WMT700
responds by sending the string
Ok
Restoring COM and COM settings…
Updating the settings is completed in a few seconds. When the operation is done,
WMT700 sends the following response Done. Rebooting…
WMT700 has now applied the settings and reboots using the new settings. For the restored settings, seethe table below. Before you start configuring new values to WMT700, apply the new settings to
HyperTerminal. To close the connection, select Call > Disconnect.
WMT700 User Guide
M211095EN-H
170


12. Select File > Properties.
13. Select Properties > Configure.
14. In Bits per second, select 9600.
15. Close the Properties window. Select Call > Call. Table 58 Restored Serial Port Settings


Document code
Testsetup according to
More information
Optiontemperature range
Optionheating
Optionhardware interface
Optionunit used
Optionoutput configuration
Selectionoutput configuration
Optionadapter type
Optionaccessories
Order codedescription
Aout1 selected option
Output signal
Swnddiroffset,(angle)
Parameterdefinition
Power supplywire colors
Used heating option
Heating option
Wire type/cable length
Descriptionspare part item
Wmt700connector pin
Open commandto activate the command, press enter
Commanddescription
Wind_getfetches wind calibration information.more information
S command. power must be on for at least 5 seconds after the s
Startcommand.more information
Itemdescription
Bitdescription
G command to fetch the current wmt700 parameters. disable error messages with the command s messages,0
Errors. if all values are valid, wmt700 sends the following response:0,0,0,0you can also use the g
Data message number
Ws425 and sdi messages
Parametername
Parameterdefault
Start command.to stop measurement, use the stop
Wb,wfirmware
Wf output:wff6785672109876.5432.1k99xx5.21.2 ws425 f/g asos data messagewmt700 responds to the wa
Bytedescription
Parameterdefault value
Id character
Wx command with a character fixed-length data message.character
Start command. to stop measurement, use thestop
Problemprobable cause
Error/eventcode
Parameter name
Propertydescription/value
Analog outputs for wind direction
Itemorder code
Configuration mode / measurement
Settingparameter
Start command. you can stop the measurement with the stop
Example of the command and response:
Baud........................................................................ 105clearerr
S............................................................................... 103sleep
Gget message. get parameter.........................................................104h
Jjunction box...............................................................28l



Share with your friends:
1   ...   95   96   97   98   99   100   101   102   ...   125


The database is protected by copyright ©userg.info 2017
send message

    Main page

bosch
camera
chevrolet
epson
fiat
Harley Davidson
Honda
iphone
mitsubishi
nissan
Panasonic
Sony
volvo
xiaomi
Xperia
yamaha