User Guide M211095en-h



Download 8.38 Kb.
View original pdf
Page39/125
Date24.02.2019
Size8.38 Kb.
1   ...   35   36   37   38   39   40   41   42   ...   125
Power Supply
Wire Colors
Pin
Operating Power Supply
White
1
Operating Power Supply Ground
Gray-Pink
11
Heater Power Supply
Gray
5
Heater Power Supply
Pink
6
Heater Power Supply Ground
Blue
7
Heater Power Supply Ground
Red
8
Enclosure Ground
Shield
Shield
Analog Outputs
Analog Output AOUT2, Wind Direction
Brown
2
Analog Output AOUT1, Wind Speed
White-Green
13
Reference Input for AOUT2 (simulated potentiometer)
White-Gray
17
Analog Output Ground
Red-Blue
12
COM port
RS-232
RS-485

COM2
RS232Rx
Rx-
Green
3
RS232Tx
Tx-
Yellow
4
-
Tx+
Brown-Green
14
-
Rx+
White-Yellow
15
COM1 and COM Communication Ports Ground
Violet
10
COM1(service port)
RS-485, -
Black
9
RS-485, +
Brown-Yellow
16 4.11.6.2 Using WS425 Cables with Adapters
If a retrofit installation using WMT700 cables is not possible, there are adapters available for most situations.
• Adapter Cable for WS425 Serial (227569SP)
• Adapter Cable for WS425 Analog Frequency Output (227570SP)
• Adapter Cable for WS425 Analog Voltage Output (227571SP)
The adapter cable specifications in this section apply for both heated and non-heated versions of WMT700.
WMT700 User Guide
M211095EN-H
94

FIX is not compatible with adapter cables due to the small diameter of the mast Adapter Cable for WS425 Serial Output
The Adapter Cable for WS425 Serial (SP) can be used with the WS425 cables
ZZ45203 and The following table lists the adapter pin-outs and signal descriptions as they appear on their user guides for both WMT700 and WS425 connectors.
Table 35 Pin-Outs for WS425 Serial Adapter Cable (227569SP)


Document code
Testsetup according to
More information
Optiontemperature range
Optionheating
Optionhardware interface
Optionunit used
Optionoutput configuration
Selectionoutput configuration
Optionadapter type
Optionaccessories
Order codedescription
Aout1 selected option
Output signal
Swnddiroffset,(angle)
Parameterdefinition
Power supplywire colors
Used heating option
Heating option
Wire type/cable length
Descriptionspare part item
Wmt700connector pin
Open commandto activate the command, press enter
Commanddescription
Wind_getfetches wind calibration information.more information
S command. power must be on for at least 5 seconds after the s
Startcommand.more information
Itemdescription
Bitdescription
G command to fetch the current wmt700 parameters. disable error messages with the command s messages,0
Errors. if all values are valid, wmt700 sends the following response:0,0,0,0you can also use the g
Data message number
Ws425 and sdi messages
Parametername
Parameterdefault
Start command.to stop measurement, use the stop
Wb,wfirmware
Wf output:wff6785672109876.5432.1k99xx5.21.2 ws425 f/g asos data messagewmt700 responds to the wa
Bytedescription
Parameterdefault value
Id character
Wx command with a character fixed-length data message.character
Start command. to stop measurement, use thestop
Problemprobable cause
Error/eventcode
Parameter name
Propertydescription/value
Analog outputs for wind direction
Itemorder code
Configuration mode / measurement
Settingparameter
Start command. you can stop the measurement with the stop
Example of the command and response:
Baud........................................................................ 105clearerr
S............................................................................... 103sleep
Gget message. get parameter.........................................................104h
Jjunction box...............................................................28l



Share with your friends:
1   ...   35   36   37   38   39   40   41   42   ...   125


The database is protected by copyright ©userg.info 2017
send message

    Main page

bosch
camera
chevrolet
epson
fiat
Honda
iphone
mitsubishi
nissan
Panasonic
Sony
volvo
xiaomi
Xperia
yamaha