User Guide M211095en-h


Configuration Mode / Measurement



Download 8.38 Kb.
View original pdf
Page107/125
Date24.02.2019
Size8.38 Kb.
1   ...   103   104   105   106   107   108   109   110   ...   125
Configuration Mode / Measurement
Mode and Profile
Command
Description
Measurement mode WS425 ASOS F/G
profile
WA
Requests average wind speed and direction message.
Measurement mode WS425 ASOS F/G
profile
WS
Requests the verbose Built-In Test (BIT) results.
Measurement mode WS425 ASOS F/G
profile
WT
Requests the short response BIT results and status.
Measurement mode WS425 ASOS F/G
profile
WD
Reports the BIT status.
Measurement mode WS425 ASOS F/G
profile
WF
Returns a fixed pattern of data.
Measurement mode WS425 AB NMEA
Extended profile
$WIP
Polls data from WMT700.
Measurement mode WMT700 NMEA
MWV profile
$aabbQ,MWV Polls NMEA MWV message from WMT700.
Measurement mode WS425 AB ASCII
profile
I
Requests identification information from WMT700.
Measurement mode WS425 AB ASCII
profile
Wx
Starts measurement based on averaging time and fetches the data.
Measurement mode WS425 AB ASCII
profile

Polls data from WMT700.
Measurement mode SDI profile
?!
Queries WMT700 for its address.
Measurement mode SDI profile
a!
Ensures that WMT700 is responding.
Measurement mode SDI profile
aI!
Queries WMT700 for its SDI compatibility level,
model number, and firmware version number.
Measurement mode SDI profile
aAb!
Changes WMT700 address.
Measurement mode SDI profile
aC!
Starts concurrent measurement.
Measurement mode SDI profile
aCC!
Starts concurrent measurement.
CRC is included in the response.
Measurement mode SDI profile
aD0!
Fetches instant data from WMT700.
Measurement mode SDI profile


Document code
Testsetup according to
More information
Optiontemperature range
Optionheating
Optionhardware interface
Optionunit used
Optionoutput configuration
Selectionoutput configuration
Optionadapter type
Optionaccessories
Order codedescription
Aout1 selected option
Output signal
Swnddiroffset,(angle)
Parameterdefinition
Power supplywire colors
Used heating option
Heating option
Wire type/cable length
Descriptionspare part item
Wmt700connector pin
Open commandto activate the command, press enter
Commanddescription
Wind_getfetches wind calibration information.more information
S command. power must be on for at least 5 seconds after the s
Startcommand.more information
Itemdescription
Bitdescription
G command to fetch the current wmt700 parameters. disable error messages with the command s messages,0
Errors. if all values are valid, wmt700 sends the following response:0,0,0,0you can also use the g
Data message number
Ws425 and sdi messages
Parametername
Parameterdefault
Start command.to stop measurement, use the stop
Wb,wfirmware
Wf output:wff6785672109876.5432.1k99xx5.21.2 ws425 f/g asos data messagewmt700 responds to the wa
Bytedescription
Parameterdefault value
Id character
Wx command with a character fixed-length data message.character
Start command. to stop measurement, use thestop
Problemprobable cause
Error/eventcode
Parameter name
Propertydescription/value
Analog outputs for wind direction
Itemorder code
Configuration mode / measurement
Settingparameter
Start command. you can stop the measurement with the stop
Example of the command and response:
Baud........................................................................ 105clearerr
S............................................................................... 103sleep
Gget message. get parameter.........................................................104h
Jjunction box...............................................................28l



Share with your friends:
1   ...   103   104   105   106   107   108   109   110   ...   125


The database is protected by copyright ©userg.info 2017
send message

    Main page

bosch
camera
chevrolet
epson
fiat
Honda
iphone
mitsubishi
nissan
Panasonic
Sony
volvo
xiaomi
Xperia
yamaha