User Guide M211095en-h


PropertyDescription/Value



Download 8.38 Kb.
View original pdf
Page101/125
Date24.02.2019
Size8.38 Kb.
1   ...   97   98   99   100   101   102   103   104   ...   125
Property
Description/Value
Observation range Starting threshold m/s
Resolution
0.01°
Response time ms
Accuracy
±2°
Available variables
Instant, average, maximum, minimum
Any temporary object (such as snow, ice, or a bird) that blocks the observation path between the ultrasonic transducer heads may lead to inaccurate or incorrect measurements.
CAUTION!
Chapter 8 – Technical Data
173

In extreme weather conditions, ice or snow accumulation may cause a temporary wind observation blackout even when heating is enabled Electrical Specifications
Table 61 WMT700 Electrical Specifications
Property
Description/Value
Operating voltage ... 36 VDC (absolute maximum 40 VDC) Heating voltage ... 36 VDC (absolute maximum 40 VDC)
1)
Heating power supply requirement
No heating W at 24 V
Heated transducers W at 24 V (peak 40 W) Heated transducers and arms W at 24 V (peak 200 W) Heated transducers, arms, and body W at 24 V (peak 350 W)
2)
1)
In maritime environments, the normal input voltage ranges are operating voltage 10 … 30 VDC (-10% … +30%) and
heating voltage 24 … 30 VDC (-10% … +30%), as defined in the maritime standard IEC 60945.
2) The actual power consumption depends on the temperature.
Table 62 WMT700 Output Specifications


Document code
Testsetup according to
More information
Optiontemperature range
Optionheating
Optionhardware interface
Optionunit used
Optionoutput configuration
Selectionoutput configuration
Optionadapter type
Optionaccessories
Order codedescription
Aout1 selected option
Output signal
Swnddiroffset,(angle)
Parameterdefinition
Power supplywire colors
Used heating option
Heating option
Wire type/cable length
Descriptionspare part item
Wmt700connector pin
Open commandto activate the command, press enter
Commanddescription
Wind_getfetches wind calibration information.more information
S command. power must be on for at least 5 seconds after the s
Startcommand.more information
Itemdescription
Bitdescription
G command to fetch the current wmt700 parameters. disable error messages with the command s messages,0
Errors. if all values are valid, wmt700 sends the following response:0,0,0,0you can also use the g
Data message number
Ws425 and sdi messages
Parametername
Parameterdefault
Start command.to stop measurement, use the stop
Wb,wfirmware
Wf output:wff6785672109876.5432.1k99xx5.21.2 ws425 f/g asos data messagewmt700 responds to the wa
Bytedescription
Parameterdefault value
Id character
Wx command with a character fixed-length data message.character
Start command. to stop measurement, use thestop
Problemprobable cause
Error/eventcode
Parameter name
Propertydescription/value
Analog outputs for wind direction
Itemorder code
Configuration mode / measurement
Settingparameter
Start command. you can stop the measurement with the stop
Example of the command and response:
Baud........................................................................ 105clearerr
S............................................................................... 103sleep
Gget message. get parameter.........................................................104h
Jjunction box...............................................................28l



Share with your friends:
1   ...   97   98   99   100   101   102   103   104   ...   125


The database is protected by copyright ©userg.info 2017
send message

    Main page

bosch
camera
chevrolet
epson
fiat
Harley Davidson
Honda
iphone
mitsubishi
nissan
Panasonic
Sony
volvo
xiaomi
Xperia
yamaha