Set-up instructions for aor ar8200 receivers set the frequency to 401. 679 Mhz



Download 5.83 Kb.
View original pdf
Date03.11.2018
Size5.83 Kb.

background image tags@wildlifecomputers.com
WildlifeComputers.com
+1 (425) 881-3048 8310 154th Ave NE, Suite Redmond, WA, 98052 USA
v.18-10
© Wildlife Computers. All rights reserved.
SET-UP INSTRUCTIONS FOR AOR AR RECEIVERS
1. Set the frequency to 401.679 MHz
• Enter 401.679 on the keypad and press the ENT key
2. Set the mode
• Push the F key on the right side of the receiver and then press the 3 (MODE) key
• Use the dial on the right side of the receiver to select LSB
• Press the ENT key
3. Set the frequency step
• Push the F key on the right side of the receiver and then press the 2 (STEP) key
• Use the dial on the side of the receiver to select Press the ENT key
4. Set the squelch to open
• Dial the squelch control counterclockwise until the S appears on the display
5. Adjust frequency to desired tone
• Use the dial on the right side to tune by 0.1 kHz steps. 401.679 MHz is a good starting place
Attenuator
The internal attenuator adds dB of signal reduction to the receiver to enable better tracking directionality when the receiver is used in close proximity to strong transmissions. When maximum search range is required, the attenuator must be turned off. When the attenuator is on,
“ATT” appears on the upper left section of the LCD screen
To toggle the attenuator on and off, briefly push F (the function key on the side of the receiver) and then push the AK button on the keypad. The ATT icon will appear when the attenuator is on. To disable the attenuator, repeat the above sequence. The ATT icon will switch off, indicating the attenuator is now off.
The complete manufacturer’s operating manual can be found at http://www.aorusa.com/support/manuals.html


Share with your friends:


The database is protected by copyright ©userg.info 2017
send message

    Main page

bosch
camera
chevrolet
epson
fiat
Honda
iphone
mitsubishi
nissan
Panasonic
Sony
volvo
xiaomi
yamaha