| Installing lock Outside Inside Deadbolt Screws Horizontal Blade RIGHT HANDED Vertical Blade LEFT HANDED 3/4˝(20mm) 1. Installing the Deadbolt. Setting the Blade. Installing the Mounting Plate. Connecting the Cable. Installing the Magnetic Sensor Connection for Video Intercom(Optional) Inside Unit Screws ab 3 2 4 1 3b 3c Mounting Screws(3b, 3c) 3a Mounting Screws(3a) 3a Mounting Screws(3a)
Smart Door Lock SHS-3320/3321 1. Installing the Deadbolt 1) Insert the deadbolt from the side of the door) Fix the deadbolt using two FH+T4 x 19 screws. 2. Setting the Blade (Ensure the Exterior Unit is aligned with the center hole of the deadbolt.) While the deadbolt is in the open position, insert the blade of the exterior unit. In the case of right-handed door, insert the blade horizontally. In the case of left- handed door, insert the blade vertically. 3. Installing the Mounting Plate 1) Detach the Interior Mounting Plate from the Interior Unit. 2) First, fasten the Interior Mounting Plate with two TH+M5 x 40 screws (b) 90% of the way) Align the Exterior Unit with the Interior Mounting Plate and then fasten the Interior Mounting Plate using one TH+M5 x 40 screws (c) Tighten all screws on the Interior Mounting Plate 100%.