Samsung Galaxy Gear S3 classic and frontier R760 and R770 User Manual



Download 2.08 Kb.
View original pdf
Page4/28
Date11.05.2019
Size2.08 Kb.
1   2   3   4   5   6   7   8   9   ...   28
Wireless Charging Dock
1. USB charger port: Connect the USB charger.
2. LED indicator: Changes colors to indicate the charge.
3. Wireless charging surface: Charge the battery through the wireless charging surface.
4. Charging stand: Remove the packaging materials from the box to use it as a charging stand.
5. Charging tray: Place the charging dock on the indention of the charging tray.
3 2
1
Charging dock
Charging stand
5 4


6
Assemble Your Gear
Getting Started
Assemble Your Gear
Prepare and charge your device before use.
Charge the Battery
Charge the battery before using it for the first time or when it sits unused for extended periods.
Warning: Use only charging devices and batteries approved by Samsung. Samsung accessories are designed for your device to maximize battery life. Using other accessories may invalidate your warranty and may cause damage.
1. Connect the USB cable to the USB charger head.
Then, insert the other end of the USB cable through the hole in the charging tray, and into to the wireless charging dock.

Before charging the Gear, remove the rubber cover from the charging dock.


7
Assemble Your Gear
Getting Started
2. Plug the USB charger head into an electric socket.
3. Place the Gear into the wireless charging dock on top of the Charging stand.
Caution: During normal operation and charging, the device and wireless charging dock may become warm. If the device, charging dock, or charging stand feels hot, stop using the device or stop charging until it cools.
Check the Charge Status
When you connect the Gear and the wireless charger dock, the wireless charger dock’s LED indicator flashes certain colors to indicate the battery level.
Color and Charge Status

Red > Green > Orange: Standby mode

Red: Charging.

Green: Fully charged

Orange: Connected to a low-charger head
Note: When a wireless charger dock error occurs, the
LED indicator flashes red. Disconnect the Gear from the wireless charger dock, and then reconnect. If the error occurs again, contact a Samsung Service Center for service support.


8
Assemble Your Gear
Getting Started
Battery Charging Tips and
Precautions

If the battery is completely discharged, the Gear cannot be turned on immediately after being connected to the charger. Allow a depleted battery to charge for a few minutes before turning on the Gear.

If you use multiple apps at once, the battery will drain quickly. To avoid losing power during a data transfer, always use these apps after fully charging the battery.

Using a power source other than the charger, such as a computer, may result in a slower charging speed due to a lower electric current.

If the Gear is being charged with other devices using a multi-charger, charging may take longer.

The Gear can be used while it is charging, but it may take longer to fully charge the battery.

If the Gear receives an unstable power supply while charging, the touchscreen may not function. If this happens, immediately disconnect the Gear from the wireless charger dock and leave the device aside until another power connection can be found.
Wear the Gear
Put on the Gear
1. Open the buckle and place the strap around your wrist.
2. Fit the strap to your wrist, insert the pin into an adjustment hole, and then secure the buckle to close it.


9
Assemble Your Gear
Getting Started
Strap Tips and Precautions

Some people may experience discomfort when wearing the Gear for prolonged periods.

If you have sensitive skin or fasten the Gear too tightly, you may feel some discomfort.

Do not expose the straps to very wet conditions.
Wet straps can cause skin irritations. Dry the straps first. If you experience skin irritation when wearing the device, stop wearing the device and consult a physician.

The Gear and the strap have passed the hazardous materials test and meet international safety standards.
Replace the Strap
Detach the strap from the Gear to replace it with a new one.
1. Slide the strap’s spring bar inwards and pull the strap away from the Gear.


10
Assemble Your Gear
Getting Started
2. Insert one end of the spring bar into the lug, slide the spring bar inwards, and connect the strap.

1   2   3   4   5   6   7   8   9   ...   28


The database is protected by copyright ©userg.info 2017
send message

    Main page

bosch
camera
chevrolet
epson
fiat
Harley Davidson
Honda
iphone
mitsubishi
nissan
Panasonic
Sony
volvo
xiaomi
Xperia
yamaha