DRIVE AND PROPELLER SHAFTS 47-4 DESCRIPTION AND OPERATION Rear Drive Shafts 1 Drive shaft 2 Outer CV joint 3 Stake nut 4 Snap ring (2 off) 5 Bolt M (6 off) 6 Shim (3 off) 7 Inner CV joint. The rear drive shafts are identical in their construction. Each drive shaft has a total length of 687 mm. The inner CV joint has six holes for attachment with bolts to the differential output flange. Each pair of bolts is fitted with shim which secures the bolts after tightening. The outer CV joint has a target on the outer diameter. This is used by the ABS wheel speed sensor for vehicle and wheel speed calculations + BRAKES, DESCRIPTION AND OPERATION, Foundation Brakes. Each drive shaft comprises two CV joints and gaiters and a tubular shaft.
DRIVE AND PROPELLER SHAFTS DESCRIPTION AND OPERATION 47-5 Rear Drive Shaft – Sectional View 1 End cap 2 Inner CV joint 3 Circlip 4 Gaiter 5 Tube 6 Outer CV joint 7 ABS Sensor target ring