Pw50 Workboard Printer User Guide



Download 2.43 Mb.
View original pdf
Page1/56
Date11.02.2019
Size2.43 Mb.
  1   2   3   4   5   6   7   8   9   ...   56


PW50
Workboard Printer
User Guide


ii
PW50 Workboard Printer User Guide
Intermec Technologies Corporation
Worldwide Headquarters 36th Ave.W.
Everett, WA 98203
U.S.A.
www.intermec.com
The information contained herein is provided solely for the purpose of allowing customers to operate and service Intermec-manufactured equipment and is not to be released, reproduced, or used for any other purpose without written permission of Intermec Technologies Corporation.
Information and specifications contained in this document are subject to change without prior notice and do not represent a commitment on the part of Intermec Technologies Corporation 2008–2013 by Intermec Technologies Corporation. All rights reserved.
The word Intermec, the Intermec logo, Norand, ArciTech, Beverage Routebook, CrossBar, dcBrowser, Duratherm, EasyADC, EasyCoder, EasySet, Fingerprint, i-gistics, INCA (under license,
Intellitag, Intellitag Gen, JANUS, LabelShop, MobileLAN, Picolink, Ready-to-Work, RoutePower, Sabre, ScanPlus, ShopScan, Smart Mobile Computing, SmartSystems, TE 2000, Trakker Antares, and Vista Powered are either trademarks or registered trademarks of Intermec Technologies
Corporation.
There are US. and foreign patents as well as US. and foreign patents pending.




Pw50 workboard printer user guide
Using the pw workboard printer
Troubleshooting and maintaining the pw50
A specifications
A warning alerts you of an operating procedure, practice,
Before you begin
You must implement both hardware and software safety
Web supportvisit the intermec website at www.intermec.com
Support > returns and repairs
Products menu, navigate to your product page. for example, to find the pw printer product page, click printers
Chapter 1 — using the pw workboard printer
Understanding how to use the pw buttons (continued)
To print a testprint
To ensure pci compliance
To configure the pw50
Setting up bluetooth communications
Standby button for more than 2 seconds.note:
Setting up serial communications
Upgrading the firmware
When upgrading your firmware, make sure the battery in the
Feed button to both pause and resume printing.to enter pause mode
To enter test mode
Standby button to turn the printer off.4
Chapter 2 — configuring the pw50
Troubleshooting the pw50
Understanding error messages
Printer problems and possible solutions
Chapter 3 — troubleshooting and maintaining the pw50
Appendix a — specifications



Share with your friends:
  1   2   3   4   5   6   7   8   9   ...   56


The database is protected by copyright ©userg.info 2017
send message

    Main page

bosch
camera
chevrolet
epson
fiat
Honda
iphone
mitsubishi
nissan
Panasonic
Sony
volvo
xiaomi
Xperia
yamaha