Mac aura xb user manual tm

Warning! Read Safety Information s

Download 448.03 Kb.
View original pdf
Size448.03 Kb.
1   2   3   4   5   6   7   8   9   10   ...   67
Warning! Read Safety Information starting on page 3 before connecting the MAC Aura XB to AC
mains power.
Warning! Before you connect any device to the MAINS OUT socket, see Linking fixtures to power in
a chain on page 10.
Warning! For protection from electric shock, the MAC Aura XB must be grounded (earthed. The
power distribution circuit must be equipped with a fuse or circuit breaker and ground-fault
(earth-fault) protection.
Warning! Socket outlets or external power switches used to supply the MAC Aura XB with power
must be located near the fixture and easily accessible so that the fixtures can easily be
disconnected from power.
Important! Do not use an external dimming system to supply power to the MAC Aura XB, as this may
cause damage to the fixture that is not covered by the product warranty.
Power voltage
Warning! Check that the voltage range specified on the fixture’s serial number label

Mac aura xbuser manual
Warning! risk group 2 led product according to en 62471. do not view the light output with optical
Warning!read the safety precautions in this section before
Control buttons
Using for the first time
Wire color(eu models)
Tips for reliable data transmission
Connecting the data link
Fastening the fixture to a flat surface
Figure 2: risk of sunlight damage
Suspending the fixture
Quick-mount surface mounting bracket
Figure 3: rigging clamp bolt
Using the control buttons
Personality → display
Beam, aura and fx control
Recommended beam and aura control method
Beam: use channels 1 through beam provides control of all parameters for the main beam and the fx section. aura
Dimmingdimmer curve
Ext and std
Color wheel priority
Ctc (color temperature control)
Calibrated and raw color output
Color mode →extended
Fx: pre-programmed beam and aura effects
Fx sync and random operation
Sync shiftthe sync shift
Fx priority and overriding
Warning! read safety information on page 3 bef
Control menu service utilities
Installing software normal method
Display messages
Beam electronic shutter effect
Fixture control settings
Channel dmx
Beam color wheel effect
Aura dimmer0 → 100% intensityfade0channel
Aura color wheel effect
Ext mode only).dmx integer
P/t speedpan and tilt speed normal / fast
Error modenormal
Aura led temp
Pan offsetpan calibrationtilt offset
Beam tmp sen err
Pan fback err
Table 5: display messages
Table 6: troubleshooting
Optics and photometric data
Control and programming
Typical power and current
Accessoriespower cables
Installation hardware
Ordering information
Brouilleur du canada

Share with your friends:
1   2   3   4   5   6   7   8   9   10   ...   67

The database is protected by copyright © 2017
send message

    Main page

Harley Davidson