Mac aura xb user manual tm



Download 448.03 Kb.
View original pdf
Page67/67
Date07.11.2018
Size448.03 Kb.
1   ...   59   60   61   62   63   64   65   66   67
powerCON TRUE1
|

R
OPERATING & ASSEMBLY INSTRUCTION
Place chuck over the cable.
Prepare cable as shown.
D
B. ASSEMBLY INSTRUCTION
A. OPERATING INSTRUCTION
Application:
The powerCON TRUE system is certified as connector with breaking capacity according IEC 60320,
VDE 0625. It is intended for use as appliance couplers and interconnection couplers. It serves to
supply power to an appliance and from an appliance to another equipment. To be installed by qualified
person only.
Connector Assignment


APPLIANCE
APPLIANCE INLET
APPLIANCE OUTLET
COMBINATION
INLET OUTLET
NAC3PX
NAC3MPX
NAC3FPX
NAC3FPX-ST
20 25 PS EJET20 25 PS EJET16 25 0
20 250
NA
C3
MX-
W
20 PS EJET16 25 0
20 25 0
NA
C3
MX-
W
20 25 PS EJETbPower IN

Power OUT
Power IN
Power OUT
[0.32"]
8 mm mm
[0.9”]
PE 23 mm
NAC3MX-W
(Plug connector)
NAC3FX-W
(Connector)
NAC3FX-W
(Connector)
NAC3MX-W
(Plug connector)
Separate the housing from the bushing (cable remain in bushing)
A
B
Insert cable into the bushing and housing.
Note: Apply cable pulling lubricant to cable jacket.”
C
20 PS EJET16 250 20 250
NA
C3
MX
-W
Approval based:
Rating:
Cable Type:
Strain Relief:
Cable O.D.:
VDE
EN EN 250 Vac A
2
H05VV-F3G 1.0 mm
2
H05VV-F3G 1.5 - 2.5 mm
2
H07RN-F3G 1.5 mm
White chuck - 12.0 mm, Length max. 2 m
UL
UL 498 / CSA C No. 182.3 250 Vac A
SJTOW, SJOOW 3 x 12 AWG
White chuck - 12.0 mm
C
[0.32"]
8 mm mm
[0.9”]
PE 23 mm
VDE (EN 60320-1/EN60320-2-2)
UL (UL 498 / CSA C No. 182.3)
40
- 50
mm Page 1
BDA 380


20 25 PS EJET16 250 20 250
NA
C3MX
-W
20 PS EJET16 250 20 250
NA
C3M
X-W
Draft. Nr.: BDA 380 Update 08.04.2014
I
I
Data subject to change without prior notice. 2014 NEUTRIK . ALL RIGHTS RESERVED. NEUTRIK are registered trademark.
®
®
©
ASSEMBLY INSTRUCTION

powerCON TRUE1
I
R
Torque Value 0.7 Nm
5.
Torque Value 2.0Nm
PRESS FIRMLY
Torx size
T8
1.
2.
4.
Wrench size mm
Slide the cable into the contacts and clamp with the screw with Torx size T8.
Wiring
VDE
UL
Slide chuck onto insert (1) and then both into housing (Slide the cable clamp bushing up the cable and tighten it with the tool as shown.
(Tool available Art. No. HTAC)
L brown black
N
blue white green
/
yellow green
Þ
Þ
Þ
Important: Align the chuck by positioning the nose into keyway.
Important: Yellow O-ring to hide to achieve IP protection (6).
6.
3.
Important:
Push and turn simultaneously.
Disassembly (open twist lock):
1. Press with screwdriver to unlock
2. Turn bushing while still pressing locking.
1.
2.
CAUTION
To ensure protection category, do not expose the connection to bending forces (e.g. do not attach loads to the cable, no free-dangling cable windings etc.).
LIE
CHT
ENS
TEIN
20 PS

AG
LI
T: +423
/
237 24 24
F: +423
/
232 53 93
NEUTRIK

USA Inc.
USA
T: +1 704
/
972 3050
F: +1 704
/
438 9202
(
)
NEUTRIK

UK Ltd.
UK
T: +44 1983
/
811 441
F: +44 1983
/
811 439
NEUTRIK
Vertriebs

GmbH
DE

/

NL

/

AT/DK
T: +49 8131
/
280 890
F: +49 8131
/
280 830
NEUTRIK France
FR
T: +33 1
/
4131 6750
F: +33 1
/
4131 0511
NEUTRIK Tokyo Ltd.
JP
T: +81 3
/
3663 4733
F: +81 3
/
3663 4796
NEUTRIK Hong Kong
Ltd.
HK
T: +852
/
2687 6055
F: +852
/
2687 6052
NEUTRIK India Pvt. Ltd.
IND
T: +91
/
982 05 43 424
F: +91
/
22 26163 540


www.martin.com

Olof Palmes All 18

8200 Aarhus N

Denmark
Tel: +45 8740 0000

Fax +45 8740 0010

Document Outline

  • Dimensions
  • Safety Information
  • Fixture overview
  • Introduction
    • Using for the first time
  • AC power
    • Power voltage
    • Power cables and power plug
    • Linking fixtures to power in a chain
  • Data link
  • Physical installation
    • Fastening the fixture to a flat surface
    • Mounting the fixture on a truss
    • Suspending the fixture
    • Quick-mount surface mounting bracket
  • Setup
    • Control panel and menu navigation
      • Using the control buttons
      • Display panel functions
    • DMX address setting
    • Beam, Aura and FX control
    • Tailoring performance
      • Pan and tilt movement
      • Cooling
      • Dimming
    • Restoring factory default settings
  • Operation and effects
    • Effects
      • Beam and Aura
      • Shutter effect
      • Dimming
      • Zoom
      • Pan and tilt
      • Controlling color
      • FX: pre-programmed Beam and Aura effects
    • RDM
  • Service and maintenance
    • Cleaning
    • Control menu service utilities
      • Functions test
      • Pan and tilt calibration
      • Software upload
    • Fixture readouts
    • Lubrication
  • DMX protocol
  • FX: pre-programmed effects
  • LEE colors and RGB equivalents
  • Onboard control menus
  • Display messages
  • Troubleshooting
  • Specifications
    • Physical
    • Dynamic Effects
    • Optics and Photometric Data
    • Control and Programming
    • Construction
    • Installation
    • Connections
    • Electrical
    • Typical Power and Current
    • Thermal
    • Approvals
    • Included Items
    • Accessories
    • Related Items
    • Ordering Information
  • PowerCON TRUE installation instructions


Mac aura xbuser manual
Warning! risk group 2 led product according to en 62471. do not view the light output with optical
Warning!read the safety precautions in this section before
Control buttons
Using for the first time
Warning! read safety information s
Wire color(eu models)
Tips for reliable data transmission
Connecting the data link
Fastening the fixture to a flat surface
Figure 2: risk of sunlight damage
Suspending the fixture
Quick-mount surface mounting bracket
Figure 3: rigging clamp bolt
Using the control buttons
Personality → display
Beam, aura and fx control
Recommended beam and aura control method
Beam: use channels 1 through beam provides control of all parameters for the main beam and the fx section. aura
Coolingfans
Dimmingdimmer curve
Ext and std
Color wheel priority
Ctc (color temperature control)
Calibrated and raw color output
Color mode →extended
Fx: pre-programmed beam and aura effects
Fx sync and random operation
Sync shiftthe sync shift
Fx priority and overriding
Warning! read safety information on page 3 bef
Control menu service utilities
Service→calibration
Installing software normal method
Display messages
Beam electronic shutter effect
Fixture control settings
Channel dmx
Beam color wheel effect
Aura dimmer0 → 100% intensityfade0channel
Aura color wheel effect
Ext mode only).dmx integer
P/t speedpan and tilt speed normal / fast
Error modenormal
Aura led temp
Pan offsetpan calibrationtilt offset
Beam tmp sen err
Pan fback err
Table 5: display messages
Table 6: troubleshooting
Optics and photometric data
Control and programming
Typical power and current
Accessoriespower cables
Installation hardware
Ordering information
Brouilleur du canada



Share with your friends:
1   ...   59   60   61   62   63   64   65   66   67


The database is protected by copyright ©userg.info 2017
send message

    Main page

bosch
camera
chevrolet
epson
fiat
Honda
iphone
mitsubishi
nissan
Panasonic
Sony
volvo
xiaomi
yamaha