Mac aura xb user manual tm

Installing software normal method

Download 448.03 Kb.
View original pdf
Size448.03 Kb.
1   ...   37   38   39   40   41   42   43   44   ...   67
Installing software normal method
1. Connect the Uploader hardware to a MAC Aura XB fixture's data input connector. Upload the fixture software as described in the uploader’s help file or user documentation. Disconnect the Uploader hardware and reconnect the fixture to the DMX link. Cycle power off and on. Check that the fixture resets correctly. If an error message appears in the display, cycle power off and on again and check that the fixture now resets correctly.

MAC Aura XB user manual
Fixture readouts
DMX input signal
menu lets you view the DMX values received on each channel in the mode –
orb EXTb – it is currently set to. If the fixture does not behave as expected, reading the DMX values can help you troubleshoot the problem.
Fixture status
The MAC Aura XB gives fixture status readouts in the
• Current software/firmware version information.
• Temperature readouts from the main PCB as well as the Beam LED and Aura LED PCBs. In each case, you can view the current temperature and the maximum temperature reached since the readout was last reset. The maximum temperatures can be reset individually. The
temperature counters are not resettable.
• Power on hours. You can view the number of hours since the resettable counter was last reset or the total number of hours since manufacture. You can also reset the resettable counter to zero.
• The manufacturer’s serial number and the fixture’s RDM ID number.

Mac aura xbuser manual
Warning! risk group 2 led product according to en 62471. do not view the light output with optical
Warning!read the safety precautions in this section before
Control buttons
Using for the first time
Warning! read safety information s
Wire color(eu models)
Tips for reliable data transmission
Connecting the data link
Fastening the fixture to a flat surface
Figure 2: risk of sunlight damage
Suspending the fixture
Quick-mount surface mounting bracket
Figure 3: rigging clamp bolt
Using the control buttons
Personality → display
Beam, aura and fx control
Recommended beam and aura control method
Beam: use channels 1 through beam provides control of all parameters for the main beam and the fx section. aura
Dimmingdimmer curve
Ext and std
Color wheel priority
Ctc (color temperature control)
Calibrated and raw color output
Color mode →extended
Fx: pre-programmed beam and aura effects
Fx sync and random operation
Sync shiftthe sync shift
Fx priority and overriding
Warning! read safety information on page 3 bef
Control menu service utilities
Display messages
Beam electronic shutter effect
Fixture control settings
Channel dmx
Beam color wheel effect
Aura dimmer0 → 100% intensityfade0channel
Aura color wheel effect
Ext mode only).dmx integer
P/t speedpan and tilt speed normal / fast
Error modenormal
Aura led temp
Pan offsetpan calibrationtilt offset
Beam tmp sen err
Pan fback err
Table 5: display messages
Table 6: troubleshooting
Optics and photometric data
Control and programming
Typical power and current
Accessoriespower cables
Installation hardware
Ordering information
Brouilleur du canada

Share with your friends:
1   ...   37   38   39   40   41   42   43   44   ...   67

The database is protected by copyright © 2017
send message

    Main page

Harley Davidson