Warning! Risk Group 2 LED product according to EN 62471. Do not view the light output with optical instruments or any device that may concentrate the beam. This lighting fixture is for professional use only - it is not for household use. The fixture must be installed by a qualified technician. The safety of the installation is the responsibility of the installer. The fixture presents risks of severe injury or death due to fire hazards, electric shock and falls. It produces a powerful, concentrated beam of light that can create afire hazard or a risk of eye injury if the safety precautions below are not followed. If you have any questions about how to install, operate or service the fixture safely, please contact your Martin™ distributor (see www.martin.com/distributors for details) or call the Martin™ 24-hour service hotline on +45 8740 0000, or in the USA on 1-888-tech-180. Respect all locally applicable laws, codes and regulations when installing, operating or servicing the fixture. Install, operate and service Martin™ products only as directed in their user documentation, or you may create a safety hazard or cause damage that is not covered byproduct warranties. Refer any service operation not described in this manual to an authorized Martin™ service technician. Do not try to carryout any such operation yourself, as doing so may present a health or safety risk. It may also cause damage or malfunction and it may void your product warranty. Before you install, operate or service the MAC Aura XB, check the Martin™ website and make sure that you have the latest user documentation for the fixture. Document revisions are indicated at the bottom of page 2. The latest versions of the product’s user documentation, including this user manual, are available for download from the MAC Aura XB Product Support page on the Martin™ website at www.martin.com. Follow the safety precautions listed below and observe all warnings in this manual and printed on the product. Keep this manual for future use. P ROTE CT ION FROM ELECTRICS HOCK bDo not expose the fixture to rain or moisture. Disconnect the fixture from AC power before carrying out any installation or service work and when the fixture is not in use. Ensure that the fixture is electrically connected to ground (earth). • Use only a source of AC power that complies with local building and electrical codes and has both overload and ground-fault (earth-fault) protection.