Instructions for future reference



Download 78.58 Kb.
View original pdf
Page1/25
Date28.09.2018
Size78.58 Kb.
TypeInstructions
  1   2   3   4   5   6   7   8   9   ...   25


1
INSTALLATION AND SERVICE MUST BE PERFORMED BY A QUALIFIED INSTALLER.
IMPORTANT: SAVE FOR LOCAL ELECTRICAL INSPECTOR'S USE.
READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Clearances and Dimensions
1.
Location—Check location where the range will be
installed. Check for proper electrical and gas supply,
and the stability of the floor.
2.
Dimensions that are shown must be used. Given
dimensions provide minimum clearance. Contact
surface must be solid and level.
Provide Proper Fuel Type
Before Proceeding: Your range is preset to operate on natural gas.
DO NOT attempt to convert this range to LP/
Propane settings without the proper LP/Propane conversion kit provided with the range or obtained from your dealer. Follow all instructions provided with the LP Conversion Kit.
Español - Páginas 9-16


Be sure your range is installed and grounded properly
Adjust surface burner flame size so it does not
Operate the electric ignition oven during an
Before starting
Normal installation steps
A. locate the bracket using the template
B. drill pilot holes and fasten bracket
C. level and position range
Do not use flame to check for gas leaks.
No more than 15ft./lbs.
Burner sizes and locations
Operation of oven burners and
Cleaning agents or any other material to
Care, cleaning and maintenance
Model and serial number location



Share with your friends:
  1   2   3   4   5   6   7   8   9   ...   25


The database is protected by copyright ©userg.info 2017
send message

    Main page

bosch
camera
chevrolet
epson
fiat
Honda
iphone
mitsubishi
nissan
Panasonic
Sony
volvo
xiaomi
yamaha