Gas Analyser Operating Manual


Analyser Data Manager (Optional)



Download 322.39 Kb.
View original pdf
Page7/62
Date11.05.2019
Size322.39 Kb.
1   2   3   4   5   6   7   8   9   10   ...   62
3.1.1
Analyser Data Manager (Optional)
Analyser Data Manager enables the user to maximise the operation of the incubator analyser. Instrument readings and event log data maybe downloaded to a PC for further analysis and exported to other applications such as MS Excel. It enables direct communication with the unit, features a simple download facility and is fully compatible with the latest Microsoft operating systems.
3.1.1.1 Event Log
The G instruments incorporate the facility to log significant events via the Event Log’.
This can be used as an aid to monitoring the use of the instrument. It can also be used as a diagnostic tool if there is a problem with the instrument.
The event log can only be viewed via the optional Analyser Data Manager software. It cannot be viewed on the analyser screen. Applicable events are stored in the event log automatically. No user intervention is required.
The event log can hold approximately 270 events. If the log becomes full then it begins to overwrite the older events. This can be identified by the index field which starts from event number 1. The log is cleared when the instrument is reset.

Note: Please refer to section ‘12.0 Event Log of this operating manual for further information.


G100 rangeoperating manual
Eu declaration of conformity. 45
G100 rangepage6
Temperature probe reading (optional)
Humidity probe reading (optional)
Oxygen reading (optional)
G100 rangepage10
Top view:side view:
G100 rangepage14
Icondescription
G100 rangepage16
G100 rangepage22
G100 rangepage24
G100 rangepage26
Step 4the memory has sufficient space available.step 5
Preliminary checks
G100 rangeomg100n1.25copyright geotechnical instruments (uk) limitedpage29
G100 rangepage30
G100 rangepage32
Reset factory settings
Eventdata recorded
Under and over range codes
G100 rangepage38
User calibration explained:
Factory calibration (curve 1)
Span calibration (curve 3)
Typical zero gas purge time
G100 rangepage42
G100 rangepage44
Our producer registration number is wee/gb0052tq
Factory settings
General warnings
Predetermined



Share with your friends:
1   2   3   4   5   6   7   8   9   10   ...   62


The database is protected by copyright ©userg.info 2017
send message

    Main page

bosch
camera
chevrolet
epson
fiat
Harley Davidson
Honda
iphone
mitsubishi
nissan
Panasonic
Sony
volvo
xiaomi
Xperia
yamaha