Special Explanation Please read it carefully before use
Note: There are beep alerts when power on/oﬀ Double tap Function Trigger Button Trigger button Explanation Lock Mode Panning Reset Long press Enter the lock mode, release it to return to before mode Restore the initial follow state of the panning Function button
Four times clicks on function button, gimbal will access the autorotation mode setting. Manually turn the gimbal to an initial position, then click again on function button for recording it.Manually turn the gimbal to end position, then click the functionbutton again for recording it. Gimbal will turn to the initial position and begin autorotation. 2. Turn the panning axis and tilting axis to the position ① and hold for half a second. Click on function button, record the position ①. 1.Four times clicks on function button, gimbal will access the autorotation mode setting. 4.Gimbal will recover to position ① automatically. Tilting axis and panning axis turn to position ② at constant speed.The gimbal is automatically reset after the end. 3 .Turn the panning axis and tilting axis to the position ② and hold for half a second .Lick on the function button again, record the position ②. Tilting Tilting Panning Panning Autorotation Mode
1 2 Manual Lock Manual lock ，pull to the speciﬁed angle to stay half a second can be lock the current angle.(The tilting axis and panning axis in the lock mode can be manual lock and the tilting axis can be manual lock in the panning mode.)Take the tilting axis as an example: Hold the camera and change its angle in tilting axis direction. Keep this position for half second, the current angle will be locked manually. gimbal speed setting reference table Annexed parameter table： gimbal autorotation function with camera delay photography function can be used to achieve a very special mobile delay photography. The speed setting is made by Feiyu ON App.