1. Plugin • Use a inch instrument cable. 2. Tuneup • Press and hold the Volume knob until the tuner comes on. When engaged, the Tuner mutes the output. Press Volume to exit Tuner. 3. Turn up • Raise the Volume to a desirable level. 4. Blend in the Image • Turn the Edit knob to adjust the Image/pickup blend. 5. Select an Image • Press the Edit knob once and the letter “ I ” will be displayed. Turn the knob to select different Images. 6. Adjust Tone • Press the Edit knob repeatedly to select among the different parameters for setting pickup tone. Turn the knob to adjust each parameter’s value. Edit Volume
4 Play/Edit and the Multi-function Controls About the multi-function controls F1 Aura packs an incredible amount of features into a small, elegant design. In order to achieve this, both the Edit and Volume knobs contain a momentary switch. Rather than just turning a knob, pressing down on it will gain access to one or more features. For this reason, this guide will refer to knob actions as turn, press, or press+hold. Refer to the chart on page 15 fora quick reference of the various features. Press Edit Volume Turn to adjust Press + Hold
5 Play / Edit F1 Aura operates in two modes Play and Edit. Play is for selecting the most frequently used controls while Edit gives you access to many more features. Play When you plugin, F Aura powers up into Play mode. In Play mode, Volume, Blend and Phase can be adjusted. The chromatic Tuner and the automatic Anti- Feedback circuit can also be activated. Edit Press and release the Edit knob to enter Edit mode the tuner’s green in-tune LED will light solid. Once in Edit, press the Edit knob repeatedly to step through the parameters. Each parameter is displayed using a single letter to represent its function seepage. Adjust its value by turning the Edit knob. A number is displayed and the tuner’s sharp at lights show positive or negative values. Note: F Aura is programmable and automatically saves your settings. To exit Edit and return to Play mode, wait 10 seconds for the display to go dark, or press + hold the Edit knob for 2 seconds. You may also immediately exit by simultaneously pressing both the Edit and Volume knobs.