2.5.1 Create a PIN Card 1. Create a PIN Card Every user will be assigned with an ID number, for example, 00001, after users are enrolled in the fingerprint lock. Create PINCard UserID 00001 ESC OK 1) Select User Manage” “FPCard Mng” Create PINCard” from the main menu. The interface as shown in the figure on the left is displayed 23
Fingerprint Lock User Manual V 2) When prompted to enter the user ID number, press to select the desired user ID, and press OK. The system then prompts you to Show the card (If the selected user ID does not exist in the system, the system will display a prompt No Enroll, as shown in the figure on the left Create PINCard Show the card Create PINCard Write succ Create PINCard Write failed -7 3) Swipe your FP card through the card reader. The interface as shown in the figure on the left is displayed If the system gives a prompt Write succ”, your PIN card is successfully created. You can replace the fingerprint verification with the PIN card verification. If the interface as shown in the figure on the left is displayed you PIN card is not written in the system. “-7” means write error. Note To create a PIN card, you need to ensure the user ID has already existed in the system otherwise, the system will display a prompt No Enroll and you need to repeat the operation. After the PIN card is successfully created, only the ID number is stored in the PIN card. 24
Fingerprint Lock User Manual Vb Verify the PIN Card Note: Set the parameter Card Only to Yes. If you set the parameter Card Only to No, you cannot verify with the created PIN card. 1) Select Set Set Opt from the main menu. The interface as shown in the figure on the left is displayed 2) Select Card Only and press OK. Then press to select Yes. Press OK to save the setting. Then, you can perform PIN card verification. 3) Swipe your PIN card through the card reader when the system returns to the initial interface. If the interface as shown in the figure on the left is displayed, the PIN card is successfully created.