E. H. Wachs 600 Knightsbridge Parkway



Download 27.99 Kb.
View original pdf
Page97/100
Date24.02.2019
Size27.99 Kb.
1   ...   92   93   94   95   96   97   98   99   100
NOTE
IMPORTANT


Chapter 7, Service and Repair Jump-Starting the Engine
E.H. Wachs
Part No. MAN, Rev. 1-0809 131 Connect the positive cable clamp to the exposed connector on the starter, as shown in Figure Connect the negative cable clamp to the swivel rail on the trailer bed.
Figure 7-35. Connect the positive jumper cable clamp
to the starter motor, and the negative clamp to the
swivel rail.
4.
Connect the other positive clamp to the positive post on the vehicle battery.
5.
Connect the other negative clamp to the negative post on the vehicle battery.
6.
Start the engine according to the instructions in Chapter Remove the jumper cable clamps from the VMT-1 engine and swivel rail, and from the vehicle battery.
8.
Run the engine for at least several minutes before turning it off. If the battery fails to charge, replace it.
NEGATIVE
POSITIVE

1   ...   92   93   94   95   96   97   98   99   100


The database is protected by copyright ©userg.info 2017
send message

    Main page

bosch
camera
chevrolet
epson
fiat
Harley Davidson
Honda
iphone
mitsubishi
nissan
Panasonic
Sony
volvo
xiaomi
Xperia
yamaha