E. H. Wachs 600 Knightsbridge Parkway



Download 27.99 Kb.
View original pdf
Page94/100
Date24.02.2019
Size27.99 Kb.
1   ...   90   91   92   93   94   95   96   97   ...   100

Part No. MAN, Rev. EH. Wachs
A
DJUSTING

THE
T
ANK
L
ATCHES
The clearance between the spoils tank door and the seal can be adjusted. If the door is leaking, tighten the latch pin adjustment. If the latch does not engage completely, loosen the latch pin adjustment.
Figure 7-26. When closing the tank door, the latch
engages behind the latch pinto clamp the door shut.
Figure 7-27. The front of the latch cover has screws
for adjusting the latch.
Latch pin
Latch
Adjustment screw
Set screw


Chapter 7, Service and Repair Adjusting the Tank Latches
E.H. Wachs
Part No. MAN, Rev. 1-0809 Perform the following procedure on both sides of the tank door.
The power switch on the engine must be in the ON position to operate the door latch.
1.
At the control panel, turn the Latch Switch to the OPEN position and hold it until the latch is fully released.
Figure 7-28. Turn the Latch Switch to the OPEN posi-
tion and hold it until the latch fully opens.
2.
Turn the setscrew on the front of the latch cover several turns counterclockwise to loosen it.
Figure 7-29. Turn the setscrew counterclockwise to
loosen it.
NOTE

1   ...   90   91   92   93   94   95   96   97   ...   100


The database is protected by copyright ©userg.info 2017
send message

    Main page

bosch
camera
chevrolet
epson
fiat
Honda
iphone
mitsubishi
nissan
Panasonic
Sony
volvo
xiaomi
Xperia
yamaha