E. H. Wachs 600 Knightsbridge Parkway


Part No. MAN, Rev. EH. Wachs



Download 27.99 Kb.
View original pdf
Page89/100
Date24.02.2019
Size27.99 Kb.
1   ...   85   86   87   88   89   90   91   92   ...   100

Part No. MAN, Rev. EH. Wachs
8.
To remove the front of the switch, unscrew the locking collar securing it to the control panel, then pull the switch out through the front of the panel.
Figure 7-14. Remove the locking ring to take the front
of the switch out of the control panel.
9.
After replacing the control panel components, reattach the panel to the trailer with the four screws.


Chapter 7, Service and Repair Replacing Fuses
E.H. Wachs
Part No. MAN, Rev. 1-0809 119
R
EPLACING
F
USES
Fuses are identified in drawing number D 77-ELEC-A in Chapter 8. Refer to the drawing to order replacement fuses.
The fuse panel is behind the serial tag plate below the control panel.
1.
To access the fuse box, remove the four screws holding the serial tag plate.
Figure 7-15. Remove the four screws on the serial tag
plate.
2.
Identify the blown fuse in the fuse block. Pullout the blown fuse and press in anew fuse. Ensure that the new fuse is the correct amperage rating seethe electrical drawing in Chapter 8.
Figure 7-16. Identify the blown fuse in the fuse block.
3.
Replace the serial tag plate fasten it with the screws.
NOTE

1   ...   85   86   87   88   89   90   91   92   ...   100


The database is protected by copyright ©userg.info 2017
send message

    Main page

bosch
camera
chevrolet
epson
fiat
Honda
iphone
mitsubishi
nissan
Panasonic
Sony
volvo
xiaomi
Xperia
yamaha