E. H. Wachs 600 Knightsbridge Parkway


Part No. MAN, Rev. EH. Wachs



Download 27.99 Kb.
View original pdf
Page88/100
Date24.02.2019
Size27.99 Kb.
1   ...   84   85   86   87   88   89   90   91   ...   100

Part No. MAN, Rev. EH. Wachs
4.
To remove a switch or gauge, first disconnect the wires. Use a screwdriver if necessary to loosen the junction screws.
5.
The tach/hour meter is fastened to the panel with screws. Remove the screws to replace it.
Figure 7-10. Remove the nuts and screws to takeoff
the tach/hour meter.
6.
The vacuum gauge is held to its bracket by two screws. To replace the vacuum gauge first remove the hose, then the screws.
Figure 7-11. Remove the hose from the vacuum
gauge, then takeout the screws holding it to the
bracket.


Chapter 7, Service and Repair Replacing Control Panel Switches
E.H. Wachs
Part No. MAN, Rev. 1-0809 117 The switches are fastened together with a locking ring. Squeeze the ring and turn it to remove the back of the switch.
Figure 7-12. The locking ring shown holds the body
of the switch to the front section.
Figure 7-13. Turn the locking ring to disassemble the
switch for removal.

1   ...   84   85   86   87   88   89   90   91   ...   100


The database is protected by copyright ©userg.info 2017
send message

    Main page

bosch
camera
chevrolet
epson
fiat
Honda
iphone
mitsubishi
nissan
Panasonic
Sony
volvo
xiaomi
Xperia
yamaha