E. H. Wachs 600 Knightsbridge Parkway


Part No. MAN, Rev. 1-0809 109



Download 27.99 Kb.
View original pdf
Page84/100
Date24.02.2019
Size27.99 Kb.
1   ...   80   81   82   83   84   85   86   87   ...   100

Part No. MAN, Rev. 1-0809 109
Blower
Change the blower oil after the initial 100 hours of opera- tion.
Change the oil in the blower every 1,000 hours of operation. Remove one of the drain plugs at the bottom of the blower housing to drain the oil.
Figure 6-21. Remove the drain plug at the bottom of
the blower to drain the oil.
Recommended oils are ROOTS synthetic oil 813-
106- of the correct viscosity for the operating temperature (see Table 2 in the ROOTS blower manual, or a good grade of industrial non- detergent, rust inhibiting, anti- foaming oil.
2.
When the oil has finished draining, replace the drain plug and tighten it.
3.
Remove the oil fill capon top of the blower housing.
Figure 6-22. Remove the oil fill capon the top of the
blower housing.
4.
Add oil until it is visible in the sight glass on the side of the blower. The blower holds 22.8 oz (670 ml) oil.
5.
Replace the oil fill cap. Wipe any spilled oil off of the blower housing.
IMPORTANT
IMPORTANT

1   ...   80   81   82   83   84   85   86   87   ...   100


The database is protected by copyright ©userg.info 2017
send message

    Main page

bosch
camera
chevrolet
epson
fiat
Honda
iphone
mitsubishi
nissan
Panasonic
Sony
volvo
xiaomi
Xperia
yamaha