Part No. MAN, Rev. EH. Wachs 3. Release the locking collar holding the plugin the inlet port at the top of the spoils tank Figure 5-9. Pull the latch on the locking collar to release it and take it off the inlet port. 4. Remove the plug from the inlet port. Place the plugin a secure location such as the trailer storage box. Figure 5-10. Remove the plug from the inlet port.
Chapter 5, Operating Instructions Vacuum System Operation E.H. Wachs Part No. MAN, Rev. 1-0809 55 Insert the port fitting end of the suction hose into the inlet port. Put the locking collar over the fitting and close the latch to secure the hose. Figure 5-11. Insert the hose fitting into the inlet port and attach it with the locking collar. 6. Slide the other end of the hose over the vacuum wand. The hose will fit tightly. Insert the wand far enough to install the hose clamp. Figure 5-12. Insert the wand fitting into the end of the vacuum hose.