Once the roller has completed 3 or revolutions and the end of the ironing cover is under the heater plate Turn the rotary iron off while keeping the foot pedal pressed down. The ironing cover is held firmly in place with the heater plate which is still lowered Tighten the cords at the left and right-hand sides of the roller, tie together and tuck under the cover Put the feed board back into place Turn the rotary iron on. The heater plate will rise. Cleaning and care 31
Repairs should only be carried out by an authorized technician in accordance with local and national safety regulations. Unauthorized repairs could cause injury or appliance damage. The manufacturer cannot beheld responsible for unauthorized work. The rotary iron does not turn on. Possible fault Solution The rotary iron has no power. Plug the machine in and check if the circuit breaker has tripped.