Shirts ^ Remove the feed board to iron shirts. 1. Shoulder yoke ^ Arrange the yoke, collar first, on the roller and smooth out Hot press the yoke. 2. Collar The collar is ironed on both sides using the left hand end of the roller. Stop ironing when the button comes to the heater plate Then turn down the collar and press lightly, holding taut. 3. Front sides ^ Lay the buttonhole front on the left hand end of the roller with the side seam along the edge of the roller Iron from the button hem up to the armhole Now move the shirt out andiron past the armhole to the side seam Iron the button side inside out so the buttons are pressed into the cushioned surface of the roller. Ironing Tips 25
4. Back ^ Start at the side seam. Pull the shirt over the roller as far as the arm hole. Smooth it out Starting from the side seam iron past the armhole, then pull the shirt further onto the roller andiron the fullback length to the second armhole Pull the shirt further down the roller andiron past the arm hole.