Atb manual-new-design-nc qxp



Download 101.7 Kb.
View original pdf
Page1/30
Date02.11.2018
Size101.7 Kb.
  1   2   3   4   5   6   7   8   9   ...   30


O
WNERS
M
ANUAL
AND
I
NSTALLATION
I
NSTRUCTIONS
Active Technology Sand Drive Fort Worth, Texas 76118 817-595-9710
www.activetech1.com
07-06

TABLE OF
C
ONTENTS
Page One
ActiBrake - Part of a System
Model Numbers, Brake Controllers and Wire Connections
Page Two Major Steps of Installing ActiBrake
Page Three
Mounting the ActiBrake Unit
Page Four
Installing the Hydraulic Lines
Filling the Reservoir
Page Five
Proper Wire Connectors
Electrical System Tests
Page Six
Electric Installation and Electrical Connections
ActiBrake Wiring Installation
Page Seven
ActiBrake Wiring Installation
Breakaway Protection
Page Eight
Breakaway Battery Surge Protection
Bleeding the Brake Lines
Page Nine
General Operation
Coupling
Trailer Connector - Vehicle Connector
Page Ten
Becoming Familiar with Braking of the Coupled Tow Vehicle - Trailer
Brake Controller Signal Determines Trailer Brake Pressure
Which In-Cab Controller is Best?
Page Eleven
Settings and Use of In-Cab Controllers
Do Not Ride Your Brake Pedal
Extend’A Life
Replacement Parts
Page Twelve Service and Maintenance
Page Thirteen
Trouble Shooting
Page Fourteen
Trouble Shooting (continued)
Page Fifteen
Warranty


- In-cab brake controller- A reliable, fully charged 12 volt breakaway battery- Breakaway switch- way trailer connector - wiring harness paired with a matching tow vehicle connector, properly wired to the tow vehicle- A reliable, fully charged 12 volt battery in your tow vehicle- Properly rated wires and wire connectors- The proper size hydraulic lines free from obstructions, kinks or pinch-points
- Quality hydraulic disc or drum trailer brakes


Actibrake - part of a system
Wire connections
Actibrake is available in three models:
Step #5checking the breakaway system.step #6
Voltage drop over distance
Installation of hydraulic lines
This is theright
Electrical installation and system tests
Do not connect these wires by color but by function!
Actibrake wiring installation
Tighten the harness
Breakaway protection
Actibrake breakaway system test
Breakaway battery - surge protection
The method for pressurizing the system during the bleed process:
Bleeding the brake lines is essential to the satisfactory
All coupling devices
See page 6 of this manual for complete details.
Become familiar with braking of the coupled tow vehicle and trailer.
Brake controller signal determines trailer brake pressure
Approved in-cab brake controllers
Settings and use of in-cab controllers
Do not ride your brake pedal
Replacement parts
Charge battery when necessary
Check brake fluid level
Trouble shooting

Directory: pdfs


Share with your friends:
  1   2   3   4   5   6   7   8   9   ...   30


The database is protected by copyright ©userg.info 2017
send message

    Main page

bosch
camera
chevrolet
epson
fiat
Honda
iphone
mitsubishi
nissan
Panasonic
Sony
volvo
yamaha