Ads1000 User Manual(atten 1 0)



Download 4.07 Mb.
View original pdf
Page1/118
Date16.06.2019
Size4.07 Mb.
  1   2   3   4   5   6   7   8   9   ...   118

User Manual
ADS1000 Series Digital Storage Oscilloscope
Version No V 1.0
Shenzhen Atten Electronics Co, Ltd


Declaration
Copyright © Shenzhen Atten Electronics Co, Ltd. All rights reserved.
Contents in this Manual are not allowed to copy, extract and translate before being allowed by Atten Company.
I

ADS Series Digital Storage Oscilloscope Brief
Introduction
ADS1000 Series Models
Model
ADS1102C
ADS1062C
ADS1042C
ADS1022C
Band Width
100MHz
60MHz
40MHz
25MHz
Real Time
Sampling
Rate
500MSa/s
Display
Color TFT LCD display
Model
ADS1102CA
ADS1062CA
ADS1042CA
ADS1022CA
Band Width
100MHz
60MHz
40MHz
25MHz
Real Time
Sampling
Rate
1GSa/s
Display
Color TFT LCD display
Model
ADS1302CE
ADS1202CE
ADS1102CE
ADS1062CE
Band Width
300MHz
200MHz
100MHz
60MHz
Real Time
Sampling
Rate
2GSa/s
Display
Color TFT LCD display
Characteristic:
The volume of the oscilloscope is cabinet and it is portable Color TFT LCD display Double channels, Bandwidth 25MHZ-300MHZ
Single real-time sampling rate are500MSa/s(ADS1000C),1Gsa/s(ADS1000CA),
2Gsa/s(ADS1000CE); Equivalent sampling rate is 50GSa/s.
Memory depth are 4Kpts(ASD1000C),18Kpts(ADS1000CE),2Mpts(ADS1000CA).
Edge, Pulse, Video
Slope
Alternative and Delay trigger function Unique Digital Filter function and Waveform recorder function Pass/Fail function Auto measure thirty two parameters support all measurement function.
Two groups reference waveforms and twenty groups capture waveforms and
II

twenty groups setups internal save/recall function and USB flash drive save/recall function.
Cursor measure covers Manual mode, Track mode and Auto mode.
Channel waveform and its FFT waveform display on split screen.
Waveform Intensity and Grid Brightness can be adjusted.
Menu display in the form of pop-up that in order to convenience users to use it.
Rich Screen display styles Classical, Modern, Tradition, Succinct.
Multiple Language User Interface Support Multilingual help system online
S tandard setup interface USB Host Support USB flash drive storage/recall function and update firmware USB Device Support PictBridge compatible printer and support PC remote control RS-232.


Ads1000 series digital storage oscilloscope accessories:
Use proper power cord
Connect the probe properl
Keep product surfaces clean and dry.
Chapter 1 accidence
Picture 1-1front panel controls
Chapter 2 functions instruction and operation
Table 2-1 auto set function menu
Picture 2-3table 2-2
Table 2-4 ch & ch function menu 2:
Setting up the ch1
Ch1 waveform add ch2waveform, see picture 2-18:
Table 2-9 fft function menu 2:
Table 2-10 fft window instruction
If you input a sine signal to channel 1, follow these steps:
Measure fft frequency
Table 2-11 ref function menu
Display scan mode
If you want to see a section of the waveform in detail, follow these steps:
Pre-trigger/delayed trigger
Table 2-14 trigger setup function menu
Auto: the waveform refresh at a high speed whether the trigger condition is satisfied or not.normal:
Table 2-16pulse trigger function menu 2
Operate instruction:
Picture 2-35table 2-20 slope trigger function menu 2
Picture 2-36operate instruction:
Alternative trigger
Table 2-22 set trigger mode to pulse trigger function menu 1:
Table 2-23 set trigger mode to pulse trigger function menu 2:
Table 2-25 set trigger mode to video trigger function menu 2:
Table 2-27 set trigger mode to slope trigger function menu 2
If you want to change holdoff time, please follow next operations:
Set up sampling rate
Table 2-30 display system function menu 2:
Picture 2-50operate introduction:
Cursors button
Track modetable 2-33 track mode function menu:
Auto modetable 2-34 auto mode function menu:
Auto measurement
Table 2-36 auto measure function voltage measure menu:
Table 2-38 auto measure function4-delay measure menu:
Table 2-40 introduction of the measure type:
If you want to measure voltage parameters, please follow next steps
If you want to measure time parameters using all measure function,
Save/recall setup
Table 2-41 save setup to device function menu:
If the display type has been changed, you want to recall this setup.
Recall setup data from usb flash drive, follow these steps:
Table 2-43 factory function menu:
Save waveforms to the oscilloscope’s internal memorizer, follow these
Save waveforms to usb flash drive
Recall saved waveform data form usb flash drive, follow these steps:
Table 2-46 picture storage function menu:
Save/recall reference waveform
Save csv file to usb flash drive, follow these steps:
Picture 2-71
Table 2-50 functional menu of the utility system 3:
Picture 2-752.13.1 system status
Table 2-53 print setup option function menu 1:
Picture 2-78table 2-54 print setup option function menu 2:
Picture 2-79to print screen picture, follow these steps:
Picture 2-802.13.5 self test
Picture 2-82
Note: don’t cutoff the power while oscilloscope is updating.
Table 2-57 pass/fail function menu 2:
Picture 2-86table 2-59 mask setting function menu 2:
Table 2-61 waveform playback function menu 1:
Chapter3 application examples
Taking automatic measurements
Measure signal peak-to-peak amplitude
Viewing impedance changes in a network
Chapter 4 prompting messages and troubleshooting
Adjust at limit :
Usb flash drive isn’t connected :
Chapter 5 service and support
Appendix a specifications
Specifications
Hard ware frequency counter

Directory: Oscil


Share with your friends:
  1   2   3   4   5   6   7   8   9   ...   118


The database is protected by copyright ©userg.info 2017
send message

    Main page

bosch
camera
chevrolet
epson
fiat
Harley Davidson
Honda
iphone
mitsubishi
nissan
Panasonic
Sony
volvo
xiaomi
Xperia
yamaha