A-200 rth-en cdr


NOTE: The AURATON 200 RTH



Download 235.04 Kb.
View original pdf
Page19/48
Date07.11.2018
Size235.04 Kb.
1   ...   15   16   17   18   19   20   21   22   ...   48
NOTE: The AURATON 200 RTH wireless temperature regulator sold with the
AURATON RTH receiver is already paired. Devices sold separately
require “pairing”.
LED
LED


10 To fasten the AURATON RTH receiver to the wall:
1) Remove protective covers from the lower and upper part of the regulator.
(See chapter Fastening the RTH receiver”).
2) On the wall, mark the location of holes for fastening screws.
3) In marked places, drill holes of a diameter corresponding to the bundled wall plugs (5 mm).
4) Insert wall plugs into the drilled holes.
5) Screw in the RTH receiver to the wall with screws, making sure they hold the receiver securely.
Fastening the RTH receiver to the wall
NOTE: If the wall is wooden, there is no need to use wall plugs. In such a case, drill two holes 2.7 mm in diameter instead of 5 mm, and screw the screws directly into the wood.
AURATON RTH


Optional elements of the system
Auraton 200 rth temperature
Battery installation / replacement
No are closed).the led flashes green
Selecting proper location for auraton 200 rth
Fixing the auraton 200 rth controller to the wall
Note:the rth receiver cannot be placed in metal containers
Pairing the auraton 200 rth wireless
Frostguard function
Reset - deregistering all devices paired
Setting the temporary
Hi 2 – ci (factory setting)hi 4
B) the remote setpoint
C) the factory setpoint (20 °c)
A) the manual setpoint
Cooperation with the auraton 200 rth regulator and/or
D) the signal is lost
Unique features of auraton 200 rth
Rth receiver enters the normal mode of operation.the rth



Share with your friends:
1   ...   15   16   17   18   19   20   21   22   ...   48


The database is protected by copyright ©userg.info 2017
send message

    Main page

bosch
camera
chevrolet
epson
fiat
Honda
iphone
mitsubishi
nissan
Panasonic
Sony
volvo
xiaomi
yamaha