A-200 rth-en cdr


Fixing the AURATON 200 RTH controller to the wall



Download 235.04 Kb.
View original pdf
Page14/48
Date07.11.2018
Size235.04 Kb.
1   ...   10   11   12   13   14   15   16   17   ...   48
Fixing the AURATON 200 RTH controller to the wall
3. Place plastic plugs in the drilled holes.
4. Screw the back of the controller enclosure to the wall with the two screws provided.
5. Install the batteries and replace the controller enclosure.
NOTE: No expansion bolts are needed for wooden walls. Just drill holes diameter 2.7 mm
(instead of 6 mm) and screw the screws directly into the wood.
Alternative fixing methods
The controller can be mounted to a smooth surface with e.g. two-sided adhesive tape.
The controller can also be placed in any location on an even surface on a support at the back of the enclosure.
hole fora mounting screw hole fora mounting screw


Optional elements of the system
Auraton 200 rth temperature
Battery installation / replacement
No are closed).the led flashes green
Selecting proper location for auraton 200 rth
Fixing the auraton 200 rth controller to the wall
Note:the rth receiver cannot be placed in metal containers
Pairing the auraton 200 rth wireless
Note: the auraton 200 rth
Frostguard function
Reset - deregistering all devices paired
Setting the temporary
Hi 2 – ci (factory setting)hi 4
B) the remote setpoint
C) the factory setpoint (20 °c)
A) the manual setpoint
Cooperation with the auraton 200 rth regulator and/or
D) the signal is lost
Unique features of auraton 200 rth
Rth receiver enters the normal mode of operation.the rth



Share with your friends:
1   ...   10   11   12   13   14   15   16   17   ...   48


The database is protected by copyright ©userg.info 2017
send message

    Main page

bosch
camera
chevrolet
epson
fiat
Honda
iphone
mitsubishi
nissan
Panasonic
Sony
volvo
xiaomi
yamaha